|
Detailed below is a suggested application programme that will provide
you with the full bio-stimulant benefits. It is by no means set
in stone, and it should be stressed that Maxicrop’s products
have a wide calendar of application. However, by adapting it to
suit your own requirements, you will be sure of achieving deep-rooted
success.
February - March
If carrying out spring renovation work use ECO-charge.
As re-growth starts – start to condition turf with a bio-stimulant
- No.1
or No.7
Apply potash if required - at the same time as conditioning the
turf by using
No.3 Pro-K-Plus.
March - April
If you need to kill moss, use No.2
April
Continue to boost strong early growth with No.1
or No.7
April - September
Switch to Maxicrop No.4
or No.5
to supply nitrogen and potassium at the same time as maintaining
the bio-stimulant effect.
No.6 is particularly useful as a rapid green-up agent prior to major
events/tournaments.
September - November
Harden-off turf by using No.6
(rich in iron) or No.3
Pro-K-Plus to provide high potash.
Use ECO-charge
to recharge the soils eco-system.
November - January
Use No.1
No.6 or
No.7 to
maintain turf health without providing a flush of
unwanted growth.
Maxicrop should be applied alongside and where possible tank-mixed
with fungicides. For a full list of compatible products, contact
your local Maxicrop International
Business Manager.
Apply foliage sprays in sufficient water volumes (100-400l/ha) to
ensure maximum leaf and stem coverage, as well as soil penetration.
The order in which products are added to the spray tank is generally
not critical, although good practice is always to add Maxicrop to
the spray tank last.
Where possible, shake well before use and add to a half-filled sprayer.
Keep the agitation system working throughout the mixing and during
spraying.
Maxicrop is normally supplied in 10 litre packs.
|
Print 
e-mail
Bookmark